The BarnColor series

– Simplicity to Perfection

Designed to be a cost-effective solution for sending and receiving multiple signals both directions over an opticalCON DUO fiber cable, BarnColor is the newest product line from Barnfind Technologies. Simple to use and easy to set up, we have taken all the complication away from fiber transport setup. – no technical knowledge or experience required.

Plug and play – Save time and money for on-site rigging

No Latency
No Compression

Diagram showing how to connect Peers and Cascade

BarnColor-4xSFP-Flex BarnColor-4x3G-SDI BarnColor-4x12G-SDI BarnColor-4xEth-PoE 1x pair of Single mode fiber

The BarnColor – 4xSFP-Flex

SFP-determined Unit

Designed to supplement the highly flexible BarnColor system, the new BarnColor 4xSFP-Flex provides 4 SFP transceiver cages on each unit and allows you to configure your BarnColor-Flex pairs with the signal processing SFPs needed for your unique application. Up to four different color units can be cascaded to each other; the system supports up to 16 transceiver cages on each side and allows the transport of 32 signal feeds; 16 feeds forward and 16 returns. Can be combined with any models in different colors.

Both MSA and non-MSA SFP modules can be inserted into this BarnColor with the limitation that dual-TX and dual-RX models will operate in single-channel mode.

Examples of SFPs being used:

PtP (any wavelength)
Multimode
BNC-SFP
HDBNC-SFP
HDMI-SFP
Analog Video-SFP
IP encap/decap-SFP
RJ45 for Ethernet

10G and 12G bandwidth versions

BarnColor-4xSFP-Flex are available in two different variants and the difference is the upper maximum bitrate. The options are maximum bitrate of 10G for 10Gbit/s Ethernet or 12G for 12G-SDI. The 12G option is capable of transmitting 10Gbit/s Ethernet and is the most versatile of the two options.

Compatibility

The BarnColor devices can be installed in colored pairs or used as satellites together with a BarnOne system. If building a pure BarnColor system you can start with any color-matching pair and extend the system later as your need expands. You can combine different models of BarnColors or use multiple of the same model in the same system as long as the colors are different.

We recommend using single mode fibers when linking the BarnColor devices.

From USD 2540,- / Unit EXW Norway
Landed pricing may differ for markets outside Norway

Back to the BarnColor overview

Technical Specifications

SFP-Ports
• SMPTE 258M, 292M, 372M, 424M, DVB-ASI, SMPTE ST-2081, (ST-2082 optional as 12G version), 1 Gbit/s Ethernet, 10 Gbit/s Ethernet

• Multirate reclocking of outputs 270Mbps – 10Gbps (12Gbps optional as 12G version)

Fiber port (Cascade and Peer)
• Neutrik opticalCON DUO, also compatible with duplex Single Mode fiber LC-LC
• SMPTE 297M

Power plug
• Neutrik powerCON
• 100-240VAC, 15Watt

Physical size
• 223mm x 277mm x 44mm (8.8” x 10.9” x 1.7”)
• 1.4 kg

Order codes:
• BarnColor-10GSFP-(or 12GSFP)-Flex-G – Green position
• BarnColor-10GSFP-(or 12GSFP)-Flex-P – Purple position
• BarnColor-10GSFP-(or 12GSFP)-Flex-B – Blue position
• BarnColor-10GSFP-(or 12GSFP)-Flex-R – Red position
• BC-PowerCable-EU – 220VAC Europe/Schuko (Hybrid CEE 7/7 plug)
• BC-PowerCable-US – 110VAC US (NEMA 5-15 grounded (Type B)

Downloads

